Hosers Car Care Products - Products - Equipment: Chemical Injectors

Maxi-Flow Non-Adjustable 3/8" x 3/8" Male	#7298 order here
#7296 - 1 to 2 gpm - $10.50
#7297 - 2 to 3 gpm - $10.50
#7298 - 3 to 5 gpm - $10.50
#7299 - 5 to 8 gpm - $10.50
#7296K Repair Kit - $3.50
3/8" x 3/8" Male long body with stainless steel orifice. Draw rate 20%.

Standard Adjustable 3/8" x 3/8" Male	#7273 order here
#7271 - 1 to 2 gpm - $14.75
#7272 - 2 to 3 gpm - $14.75
#7273 - 3 to 5 gpm - $14.75
#7274 - 5 to 8 gpm - $14.75
#7337 Repair Kit - $2.99
3/8" x 3/8" Male with stainless steel orifice. Used for introducing harmful chemicals into a system downstream. Draw rate 10%. Acid injectors available in this style. Specify when ordering.

Maxi-Flow Adjustable	#7294 order here
#7291 -1 to2 gpm - $13.99
#7292 - 2 to 3 gpm - $13.99
#7293 - 3 to 5 gpm - $13.99
#7294 - 5 to 8 gpm - $13.99
#7291K - Repair Kit - $6.99
3/8" x 3/8" Male with stainless steel orifice. Draw rate 20%. Acid injectors available in this style. Specify when ordering.

Long Body, Non-Adjustable, 3/8" x 3/8" Male	no photo order here
#7541 -1 to2 gpm - $10.50
#7542 - 2 to 3 gpm - $10.50
#7543 - 3 to 5 gpm - $10.50
#7544 - 5 to 8 gpm - $10.50
#7336 - Repair Kit - $3.50
3/8" Male x 3/8" Female long body with stainless steel orifice. Draw rate 10%. Specifically designed for tight places. Eliminates nipples and bushings.

Long Body, Adjustable, 3/8" Male x 3/8" Female	no photo order here
#7546 -1 to2 gpm - $17.25
#7547 - 2 to 3 gpm - $17.25
#7548 - 3 to 5 gpm - $17.25
#7549 - 5 to 8 gpm - $17.25
#7337 - Repair Kit - $2.99
3/8" Male x 3/8" Female long body with stainless steel orifice. Draw rate 10%. Specifically designed for tight places. Eliminates nipples and bushings.

Long Body, Adjustable, 3/8"x 3/8" Male	no photo order here
#7226 -1 to2 gpm - $15.75
#7227 - 2 to 3 gpm - $15.75
#7228 - 3 to 5 gpm - $15.75
#7229 - 5 to 8 gpm - $15.75
#7337 - Repair Kit - $2.99
3/8" x 3/8" Male long body with stainless steel orifice. Draw rate 10%. Specifically designed for tight places. Eliminates nipples and bushings. Acid injectors available in this style. Specify when ordering.

Quick Injectors

Steamline your combination injector/quick disconnect assembly
Available as a "Stainless Plate" corrosion resistant body equivalent to 316 Stainless (45/50 Rockwell C Hardness) or Brass Construction with stainless steel ball.
Acid resistant special composition ball.
Stainless Plate Only
Inconel Spring
Built-in 3/8" socket and 3/8 plug saves you money on labour for assembly
Working pressure 3000 PSI with a 10% draw rate. A 35% minimum pressure drop is needed to activate the injector.
Operating temperature up to 180°F.

Stainless Plate , Non-Adjustable	#7535 order here
Inlet 3/8" Socket Outlet 3/8" Plug
#7533 -1 to 2 gpm - $15.50
#7534 - 2 to 3 gpm - $15.50
#7535 - 3 to 5 gpm - $15.50
#7536 - 5 to 8 gpm - $15.50
#7533K - Repair Kit - $6.99
Inlet 3/8" Plug Outlet 3/8" Socket
#7562 - 1 to 2 gpm - $15.50
#7563 - 2 to 3 gpm - $15.50
#7564 - 3 to 5 gpm - $15.50
#7565 - 5 to 8 gpm - $15.50
#7533K - Repair Kit - $6.99

Detergent Injectors
#7560 Detergent Injector - $18.99
#7655 Adjustable Detergent Injector - $23.99
These injectors allow you to control water flow by means of an external adjusting knob. This allows the injector to cover a broader range of flows, taking much of the guesswork out of injector selection. They may be used on either the upstream or downstream side of the pump. On the upstream side the valve covers a range of .5-3.5 GPM @ 10-120 PSI. On the downstream side the flow rate is adjustable from 2.0-8 GPM, with a maximum pressure of 3500 PSI. Operating Temperature 180°F. The injection rates of these valves are dependent on GPM and pressure, but range from 6% to 13% on the #7650. The #7655 comes with a metering barb on the chemical inlet and is adjustable from 0-13%, again dependent on GPM and pressure.	#7655 order here
#7650K Repair Kit for Detergent Injector - $3.75
#7655K Repair Kit for Adjustable Detergent Injector - $6.25

Chemical Strainers
#7160 w/o check valve - $2.25
#7165 w/ check valve - $2.50
High impact reinforced nylon chemical strainers 1/8" to 1/4" hose barb.	no photo order here

Chemical Strainers with Tubing
#7167 8' x 1/4" Tubing (w/o check valve) - $4.85
#7168 8' x 1/4" Tubing w/ check valve - $5.35
Above listed strainers with 8' of 1/4" tubing.	no photo order here